The cow clog offers a simple, low cost solution to the common problem of lameness and aids the cow back to health and full milk production. Usually, just one claw becomes infected or bruised and this is when the cow clog can help very effectively.
The cow clog works by gluing the clog to the HEALTHY claw. This relieves the pressure on the infected or bruised claw by raising it about one inch off the ground. It takes around two weeks for the clog to wear down, enough time to achieve a speedy and often very dramatic recovery.
The cow clog is an ideal remedy for bruised Claw, Ulcerated Claw and Septic Claw when one claw only requires treatment. The cow clog is NOT suitable for use when BOTH claws are infected or damaged or when there is infection BETWEEN the claws.
The Original Cow Clog
The Original Cow Clog pack consist of adhesive and wooden blocks (clogs). The adhesive has two pre-measured components making mixing simple. Once the adhesive is mixed and applied to the cow�s claw, the clog is placed into position and the adhesive is moulded into a �Boot� around the block and cow�s claw. A chemical reaction takes place hardening the adhesive and securing the wooden block to the cow�s claw.
Find out more...
Super Cow Clog
The new Super Cow Clog features the latest technology in polyurethane adhesives. Specially developed for Bovine use this contact adhesive is very fast setting when compared to conventional glues. It is simple to use and requires no mixing or moulding to achieve adhesion. The glue is simply dispensed through a specially designed mixing tip and applicator gun.
Find out more... |
