Spreading fertiliser straight after cutting (when grass really needs it) is a very "hit and miss" affair, given the combination of short grass stubble and a confusing lattice work of tractor wheelings covering the field. The Foam Align blob marker allows the tractor driver to see where his last bout line was, by automatically dropping large blobs of foam under the tractor. These are used as a guide on the return bout. The ability to spread accurately eliminates the risk of ugly striping and ensures proper distribution of fertiliser. The Foam Align blob marker is purpose-designed in tough moulded plastic. The moulding is a 25 litre (5.8 gals) capacity reservoir which is sufficient to cover up to 30 acres, (12 hectares) and incorporates a 12 volt compressor to produce the foam. The Foam Align moulding has preformed mounting bolt holes at the sides of the machine for a quick and easy fixing to any convenient part of the tractor or spreader. Also supplied with the machine, is a 1.5m length of pipe to carry the foam, and a 3m length of cable with a cigar lighter adapter to plug in for the power supply from the tractor. Bouta Foam liquid has been specially developed for the Foam Align machine, and incorporates quality detergents, bulk foam boosters, rust inhibitors, water softening agents and stabilisers. Highly concentrated, it produces stable long life foam marks. Packed in convenient sized bottles each provides enough fluid to mark up to 250 acres. Red Dye, to further enhance the mark is also available. Box Contents: 4 x 2.5 litre bottle -10 litres (60 doses, 15 per bottle) use single dose with every 5 gallons (23 litres) of water. | 
